Placid Crafts Handmade Raw Series Brass & Rebar Fountain Pen / #355

Description

Raw Brass & Rebar Fountain Pen
This raw series fountain pen is machined from C3604 brass for the hardware and features a Genuine 1/2" Rebar body. Both the brass and copper are raw ( no coating) and they will patina and take on the antique look that is so popular today. The cap is posted; it screws onto both ends of the pen with smooth treads for secure storage. The pen section is 5-1/8” long. Capped the pen is 5-1/2” long and it is 6-7/8” long posted. The pen body is right at ½” in diameter. Brass and rebar being heavy makes the pen weighs in at 3.1 ounces. One ink cartridge and converter are included. #355
ABOUT REBAR:
Rebar (short for
reinforcing bar), also known as reinforcing steel.  Common rebar is made of unfinished tempered
steel. Rebar is used as a tension device in reinforced concrete and masonry structures to strengthen and hold the concrete in compression.
The majority of rebar are deformed, as opposed to round. Rebar's surface is patterned to form a better bond with the concrete.
The ribs and depressions on its surface can increase the bond strength with concrete and prevent slippage. The pattern vary but usually there are two raised lines running the length of the bar 180˚apart with a spiral pattern between them. The deformed rebar is NOT ROUND. The diameter across the raised bars is larger than the diameter opposite the bars.
Rebar is tempered steel that is case hardened. The core is alloy steel but the closer to the outside the harder the steel gets. This makes drilling it a real problem. I use special hard drill bits manufactured from tungsten and molybdenum to increased hardness and with cobalt added to ensure superior heat resistanc
e.
About Placid Crafts:
Placid crafts specializes in handmade pens both conventional handmade and their signature metal series pens. These are made on a metal lathe form solid metal round stock blanks; these are made from Rebar, Aluminum, Brass, and Copper. These are drilled out to 3/8” and a brass tube glued in to mount the hardware to. The Rebar is lightly cleaned on a wire wheel and sprayed with a clear coat to protect the steel from rusting. The other metal pens are turned to the proper size and the sanded for a smooth surface. These pen bodies are not sealed or coated. They will patina as each type of metal will. They will get darker as they age and the patina gives them the antique look that is so popular right now.
Thank You
From
Cyber Pen Sales